{"title":"LCDs \u0026 Displays","description":"\u003cp\u003eBrowse our LCDs \u0026amp; Displays collection. New Arrival.\u003c\/p\u003e","products":[{"product_id":"hdmi-5-800-x-480-display-backpack-with-resistive-touchscreen-discontinued","title":"HDMI 5\" 800 x 480 Display Backpack - With Resistive Touchscreen [Discontinued]","description":"\u003cp\u003eIt's a mini panel-mountable HDMI monitor with a built-in resistive touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video and includes the attached display so it's plug-n-play.\u003c\/p\u003e\n\u003cp\u003eThe TFP401 is a beefy DVI\/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit colour pixel data - \u003cstrong\u003eHDCP is not supported\u003c\/strong\u003e! The 5\" display is 800 x 480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk.\u003c\/p\u003e\n\u003cp\u003eYou can even power the entire display from a USB port. With the default 5\" 800 x 480 display and 50mA backlight current, the current draw is 500mA total. You can reduce that down to 370mA by running the backlight at half-brightness (25mA). With the backlight off, the decoder and display itself draw 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desired.\u003c\/p\u003e\n\u003cp\u003eWe have two versions, one is video only and one is video+touch. \u003cstrong\u003eThis version has touchscreen capability\u003c\/strong\u003e. The touch screen shows up as a USB mouse so no special drivers are needed. We've tested it successfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that. We also noted it does not work with a Raspberry Pi + Windows 10 IOT yet.\u003c\/p\u003e\n\u003cp\u003eUse this micro HDMI cable for the Raspberry Pi 4 and 5.\u003c\/p\u003e\n\u003cp\u003eIn particular, we suggest it for use with single-board computers (or desktops\/laptops!) with DVI\/HDMI output like the Raspberry Pi or BeagleBone Black. You can power the driver over USB as long as your computer can supply 500mA on the USB port, and then feed it video via the HDMI port. \u003cstrong\u003ePlease note the TFP401 decoder chip does not contain a video scaler, it will not resize\/shrink video!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product does not include an HDMI, Raspberry Pi or USB cable (power supply).\u003c\/strong\u003e Use any HDMI for video, and any micro-B USB cable to power the display.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 124mm x 76mm x 7mm\u003c\/li\u003e\n\u003cli\u003eWeight: 106g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDownloads and Tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751141630315,"sku":"khp1787257245174","price":50.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-5-800-x-480-display-backpack---with-resistive-touchscreen-discontinued_1.jpg?v=1787257254"},{"product_id":"hdmi-4-pi-7-display-no-touchscreen-1024x600-w-mini-driver-discontinued","title":"HDMI 4 Pi: 7\" Display no Touchscreen 1024x600 w\/ Mini Driver [Discontinued]","description":"\u003cp\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eYes, this is a 7\" TFT display with 1024x600 resolution and a cute little driver board. We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB port. The visible display measures 7\" diagonal and is a 'raw' TTL display as is used in portable electronics. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers, HDMI is the best quality output available. The display is very easy to use - simply connect the USB power cable to 5V power supply that can provide 500mA, then connect a digital video source to one of the HDMI port. Voila, a display!\u003c\/span\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eIt is not an IPS display so its best for direct viewing, our 7\" and 10\" HDMI IPS displays are designed for any angle view. That said, its the nicest 7\" 1024x600 display we could get.\u003c\/span\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu keypad which to display.\u003c\/span\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI output.\u003c\/span\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eFor use with a Raspberry Pi we suggest editing config.txt to set the HDMI to 1024x600 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save. For use with a BeagleBone black, we found it works when plugged in, no configuration required.\u003c\/span\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003eWe show the TFT above on a wire stand, which is not included. You can pick up one of these nice stands over here.\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cbr style=\"line-height: 20.7999992370605px;\"\u003e\u003cb style=\"line-height: 20.7999992370605px;\"\u003eA power adapter is not included!\u003c\/b\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003e Use a 500mA-capable 5V USB port or you can cut the USB power cable and re-wire to another 5V source.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003eLCD Datasheet (includes display dimensions)\u003c\/li\u003e\n\u003cli\u003ePower with 5-12 VDC\u003c\/li\u003e\n\u003cli\u003eResolution: 1024 x 600\u003c\/li\u003e\n\u003cli\u003eDisplay Weight (excluding power cable): 97g\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751141663083,"sku":"cpr1787257245339","price":52.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-4-pi-7-display-no-touchscreen-1024x600-w-mini-driver-discontinued_1.jpg?v=1787257254"},{"product_id":"hdmi-4-pi-7-display-audio-1024x600-hdmivgantscpal-discontinued","title":"HDMI 4 Pi: 7\" Display \u0026 Audio 1024x600 - HDMI\/VGA\/NTSC\/PAL [Discontinued]","description":"\u003cp\u003eYes, this is a 7\" TFT display with 1024x600 resolution with audio-over-HDMI capability! We tried to get the best medium-size display that would be good for embedded computing usage and at a good price.  We include a driver board with HDMI, VGA and Composite inputs as stereo 4 ohm at 3W output speaker driving capability. The visible display measures 7\" diagonal and is a 'raw TTL' display. The set up is very easy to use - simply connect a 9-12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports and two 4 to 8 ohm speakers to the SPK output pins. Voilà, a display with audio!\u003c\/p\u003e\u003cp\u003eIt is not an IPS display so its best for direct viewing, our 7\" and 10\" HDMI IPS displays are designed for any angle view. That said, its the nicest 7\" 1024x600 display we could get.\u003c\/p\u003e\u003cp\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.\u003c\/p\u003e\u003cp\u003eWe include a plug-in cable that connects to the 4 speaker output pins, the pins are labeled LOUT+\/- and ROUT+\/-. You'll have to solder your own speakers to the 4 wires\u003cbr\u003e\u003cbr\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC\/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.\u003cbr\u003e\u003cbr\u003eFor use with a Raspberry Pi we suggest editing config.txt to set the HDMI to native 1024x600 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save. For use with a BeagleBone Black running Ubuntu\/Debian, we found it works when plugged in, no configuration required.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA power adapter is NOT included. \u003c\/strong\u003eYou will need to either purchase a 5-12VDC adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003eTFT Display Datasheet\u003c\/li\u003e\n\u003cli\u003ePower with 9-12VDC\u003c\/li\u003e\n\u003cli\u003eResolution: 1024 x 600\u003c\/li\u003e\n\u003cli\u003eDisplay Weight (excluding power cable): 97g\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751141695851,"sku":"jwn1787257246655","price":52.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-4-pi-7-display-audio-1024x600---hdmivgantscpal-discontinued_1.jpg?v=1787257255"},{"product_id":"hdmi-4-pi-7-display-no-touchscreen-1024x600-hdmivgantscpal-discontinued","title":"HDMI 4 Pi: 7\" Display no Touchscreen 1024x600- HDMI\/VGA\/NTSC\/PAL [Discontinued]","description":"\u003cp\u003eMake a lovely video setup with a 7\" screen at \u003cb\u003e1024x600 resolution\u003c\/b\u003e. For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7\" diagonal and is a 'raw TTL' display. We include a driver board with HDMI, VGA and Composite inputs. The setup is very easy to use - simply connect a 5-12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports . Voilà, a display!\u003cbr\u003e\u003cbr\u003eThis version comes in 1024x600 instead of the more expensive 1280x800 display. It's also not IPS so it's not good for wide-angle visibility.\u003cbr\u003e\u003cbr\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.\u003cbr\u003e\u003cbr\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC\/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.\u003cbr\u003e\u003cbr\u003eFor use with a Raspberry Pi we suggest editing \u003cstrong\u003econfig.txt\u003c\/strong\u003e to set the HDMI to the native 1024x600 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.\u003c\/p\u003e\u003cp\u003eFor use with a BeagleBone Black running Ubuntu\/Debian, we found it works when plugged in, no configuration required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eA power adapter is NOT included\u003c\/b\u003e. You will need to either purchase a 5-12VDC adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003eTFT Display Datasheet\u003c\/li\u003e\n\u003cli\u003ePower with 5-12 VDC\u003c\/li\u003e\n\u003cli\u003eResolution: 1024 x 600\u003c\/li\u003e\n\u003cli\u003eDisplay Weight (excluding power cable): 97g\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751141728619,"sku":"izd1787257247552","price":47.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-4-pi-7-display-no-touchscreen-1024x600--hdmivgantscpal-discontinued_1.jpg?v=1787257256"},{"product_id":"70-40-pin-tft-display-800x480-with-touchscreen","title":"7.0\" 40-pin TFT Display - 800x480 with Touchscreen","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe 7.0\" 800x480 TFT Display with Resistive Touchscreen gives you plenty of space for crisp graphics and interactive interfaces. Featuring a bright LED backlight and 24-bit colour via a 40-pin RGB interface, it’s ideal for BeagleBone or FPGA projects needing raw TTL pixel control and touch input.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis 7.0\" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. It is great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit colour capability.\u003c\/p\u003e\n\u003cp\u003eThis version has a 4-wire resistive touchscreen attached It's exactly the same TFT display as PID 2353 but with a resistive touch panel so it is a little more expensive.\u003c\/p\u003e\n\u003cp\u003eThis is a \"raw pixel-dot-clock\" display and does not have an SPI\/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high-end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a 125-150mA constant-current mode boost converter that can go as high as 9V, instead of our other small displays that can run the backlight off of 5V.\u003c\/p\u003e\n\u003cp\u003eFor that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller (including Arduino \u0026amp; friends)\u003c\/p\u003e\n\u003cp\u003eIf you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast, you can try wiring this directly to your processor, but we don't have any support or tutorials for that purpose.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rMoTLa9ETbI?si=hCkdIktLlf4Vi-lX\u0026amp;start=509\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 164mm x 100mm x 5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of January 13, 2023\u003c\/strong\u003e we're now shipping TFTs from a new supplier - the display is the same size, pinout, timing, etc. The backlight is a little brighter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 7.0\" 40-pin TFT Display - 800x480 with Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751141761387,"sku":"kis1787257248782","price":21.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/70-40-pin-tft-display---800x480-with-touchscreen_1.jpg?v=1787257258"},{"product_id":"70-40-pin-tft-display-800x480-without-touchscreen","title":"7.0\" 40-pin TFT Display - 800x480 without Touchscreen","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe 7.0\" 800x480 TFT Display (No Touch) offers crisp, full-colour visuals with a bright LED backlight — perfect for projects needing extra screen space. Designed for advanced processors with RGB TTL output, it’s ideal for BeagleBone and FPGA use, without the added cost of a touchscreen.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis 7.0\" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. It is great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit colour capability.\u003c\/p\u003e\n\u003cp\u003eThis version does not have touchscreen attached It's exactly the same TFT display as PID 2354 but without the resistive touch panel so it is a little less expensive.\u003c\/p\u003e\n\u003cp\u003eThis is a \"raw pixel-dot-clock\" display and does not have an SPI\/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high-end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a 125-150mA constant-current mode boost converter that can go as high as 9V instead of our other small displays that can run the backlight off of 5V\u003c\/p\u003e\n\u003cp\u003eFor that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller (including Arduino \u0026amp; friends)\u003c\/p\u003e\n\u003cp\u003eIf you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast, you can try wiring this directly to your processor, but we don't have any support or tutorials for that purpose.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rMoTLa9ETbI?si=J1NF_ysUsEUotCrN\u0026amp;start=512\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 164mm x 100mm x 4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of March 28, 2023\u003c\/strong\u003e we're now shipping TFTs from a new supplier - the display is the same size, pinout, timing, etc. The backlight is a little brighter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 7.0\" 40-pin TFT Display - 800x480 without Touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751141925227,"sku":"etl1787257250980","price":21.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/70-40-pin-tft-display---800x480-without-touchscreen_1.jpg?v=1787257260"},{"product_id":"hdmi-4-pi-7-display-wtouchscreen-1024x600-w-mini-driver-discontinued","title":"HDMI 4 Pi: 7\" Display w\/Touchscreen 1024x600 w\/ Mini Driver [Discontinued]","description":"\u003cp\u003eMake a lovely, touchscreen video setup with a 7\" screen at \u003cstrong\u003e1024x600 resolution with a resistive touchscreen overlay!\u003c\/strong\u003e For this model, we tried to get an inexpensive 1024x600 display that was still high quality and would be good for embedded computing usage. The visible display measures 7\" diagonal.\u003c\/p\u003e\u003cp\u003eWe matched this version with a small driver board that can be powered with a USB port.  The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black, and other computers, HDMI is the best quality output available anyway.\u003c\/p\u003e\u003cp\u003eWe also include one of our Resistive Touch Screen to USB Mouse Controllers - AR1100 so you can connect one from your computer (or Pi).  The Resistive Touch Screen to USB Mouse Controller is a board that can handle analog to digital conversion.  Most converters we've found are not very easy to use, and are 'fixed' - making them difficult to calibrate. The AR1100 is a nice chip that solves this problem by acting as a touch-\u0026gt;USB converter and also comes with calibration software. The calibration software is Windows only, but once you've calibrated you can use the screen on any OS. The touch screen shows up as a USB mouse so no special drivers needed. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that. We also noted it does not work with a Raspberry Pi + Windows 10 IOT yet.\u003cbr\u003e\u003cbr\u003eThis version comes in 1024x600 instead of the more expensive 1280x800 display. It's also not IPS so it's not good for wide-angle visibility.\u003cbr\u003e\u003cbr\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.\u003cbr\u003e\u003cbr\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI output.\u003cbr\u003e\u003cbr\u003eFor use with a Raspberry Pi we suggest editing \u003cstrong\u003econfig.txt\u003c\/strong\u003e to set the HDMI to the native 1024x600 in case it doesn't detect the resolution properly.  You can see the suggested config.txt in the HDMI Uberguide.  The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.\u003c\/p\u003e\u003cp\u003eFor use with a BeagleBone Black running Ubuntu\/Debian, we found it works when plugged in, no configuration required.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA power adapter, Raspberry Pi, wire stand, and wires are NOT included. \u003c\/strong\u003eYou will need to either purchase a 5V USB adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003eTFT Display Datasheet\u003c\/li\u003e\n\u003cli\u003ePower with 5-12 VDC\u003c\/li\u003e\n\u003cli\u003eResolution: 1024 x 600\u003c\/li\u003e\n\u003cli\u003eDisplay Weight (excluding power cable): 150g\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003cli\u003eCable length may vary by \u0026lt;1 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751141990763,"sku":"brm1787257253132","price":56.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-4-pi-7-display-wtouchscreen-1024x600-w-mini-driver-discontinued_1.jpg?v=1787257261"},{"product_id":"hdmi-7-800x480-display-backpack-without-touch-discontinued","title":"HDMI 7\" 800x480 Display Backpack - Without Touch [Discontinued]","description":"\u003cp\u003eIts a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play.\u003c\/p\u003e\u003cp\u003eThe TFP401 is a beefy DVI\/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! The 7\" display is 800x480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk.\u003c\/p\u003e\u003cp\u003eYou can even power the entire display from a USB port. With the default 7\" 800x480 display and 150mA backlight current, the current draw is 600mA total. You can reduce that down 400mA by running the backlight at half-brightness (75mA). With the backlight off, the decoder and display itself draws 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desired.\u003c\/p\u003e\u003cp\u003eWe have two versions, one is video only and one is video+touch. T\u003cstrong\u003ehis version does not have a touch screen capability\u003c\/strong\u003e. If you want a screen that you can poke at, get the +touch version\u003c\/p\u003e\u003cp\u003eIn particular, we suggest it for use with single board computers (or desktop\/laptops!) with DVI\/HDMI output like the Raspberry Pi or BeagleBone Black. You can power the driver over USB as long as your computer can supply 600mA on the USB port, and then feed it video via the HDMI port. \u003cstrong\u003ePlease note the TFP401 decoder chip does not contain a video scaler, it will not resize\/shrink video!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePLEASE CHECK OUT THIS TUTORIAL ON HOW TO SET UP THE RESOLUTION WHEN USING WITH A RASPBERRY PI!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 165mm x 102mm x 14mm \/ 6.5\" x 4\" x 0.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 192g\u003c\/li\u003e\n\u003cli\u003eDatasheets and CAD files in tutorial download page\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751142023531,"sku":"exc1787257253565","price":53.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-7-800x480-display-backpack---without-touch-discontinued_1.jpg?v=1787257262"},{"product_id":"hdmi-7-800x480-display-backpack-with-touchscreen-discontinued","title":"HDMI 7\" 800x480 Display Backpack - With Touchscreen [Discontinued]","description":"\u003cp\u003eIts a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play.\u003c\/p\u003e\u003cp\u003eThe TFP401 is a beefy DVI\/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! The 7\" display is 800x480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk.\u003c\/p\u003e\u003cp\u003eYou can even power the entire display from a USB port. With the default 7\" 800x480 display and 150mA backlight current, the current draw is 600mA total. You can reduce that down 400mA by running the backlight at half-brightness (75mA). With the backlight off, the decoder and display itself draws 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desired.\u003c\/p\u003e\u003cp\u003eWe have two versions, one is video only and one is video+touch. \u003cstrong\u003eThis version has touch screen capability\u003c\/strong\u003e. The touch screen shows up as a USB mouse so no special drivers needed. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that. We also noted it does not work with a Raspberry Pi + Windows 10 IOT yet.\u003c\/p\u003e\u003cp\u003eIn particular, we suggest it for use with single board computers (or desktop\/laptops!) with DVI\/HDMI output like the Raspberry Pi or BeagleBone Black. You can power the driver over USB as long as your computer can supply 600mA on the USB port, and then feed it video via the HDMI port. \u003cstrong\u003ePlease note the TFP401 decoder chip does not contain a video scaler, it will not resize\/shrink video!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePLEASE CHECK OUT THIS TUTORIAL ON HOW TO SET UP THE RESOLUTION WHEN USING WITH A RASPBERRY PI!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product does not include an HDMI or USB cable (power supply)\u003c\/strong\u003e. Use any HDMI for video, and any micro-B USB cable to power the display.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 165mm x 102mm x 14mm \/ 6.5\" x 4\" x 0.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 241g\u003c\/li\u003e\n\u003cli\u003eDatasheets and CAD files in tutorial download page\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751142056299,"sku":"zlx1787257254335","price":57.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-7-800x480-display-backpack---with-touchscreen-discontinued_1.jpg?v=1787257263"},{"product_id":"hdmi-4-pi-7-display-audio-1024x600-wtouchscreen-discontinued","title":"HDMI 4 Pi: 7\" Display \u0026 Audio 1024x600 w\/Touchscreen [Discontinued]","description":"\u003cp\u003e\"Give me the works!\" That's what we said when we put together this 7\" screen at \u003cb\u003e1024x600 resolution, with a resistive touchscreen overlay AND with HDMI stereo speaker support\u003c\/b\u003e! For this model, we tried to get an inexpensive 1024x600 touchscreen display that was still high quality and would be good for embedded computing usage. The visible display measures 7\" diagonal and is a 'raw TTL' display. We include a driver board with HDMI, VGA and Composite inputs and HDMI stereo speaker support.\u003c\/p\u003e\u003cp\u003eWe also include a plug-in cable that connects to the 4 speaker output pins, the pins are labeled LOUT+\/- and ROUT+\/- you'll have to solder your own speakers to the 4 wires.\u003c\/p\u003e\u003cp\u003eThere's also one of our Resistive Touch Screen to USB Mouse Controllers - AR1100 so you can connect one from your computer (or Pi).  The Resistive Touch Screen to USB Mouse Controller is a board that can handle analog to digital conversion.Most converters we've found are not very easy to use, and are 'fixed' - making them difficult to calibrate. The AR1100 is a nice chip that solves this problem by acting as a touch-\u0026gt;USB converter and also comes with calibration software. The calibration software is Windows only, but once you've calibrated you can use the screen on any OS. The touch screen shows up as a USB mouse so no special drivers needed. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that. We also noted it does not work with a Raspberry Pi + Windows 10 IOT yet.\u003cbr\u003e\u003cbr\u003eThis version comes in 1024x600 instead of the more expensive 1280x800 display. It's also not IPS so it's not good for wide-angle visibility. Because of the way the screen is made, the resistive touchscreen we have added on top does not work on the top 2mm of the TFT.\u003cbr\u003e\u003cbr\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.\u003cbr\u003e\u003cbr\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC\/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.\u003cbr\u003e\u003cbr\u003eFor use with a Raspberry Pi we suggest editing \u003cstrong\u003econfig.txt\u003c\/strong\u003e to set the HDMI to the native 1024x600 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the HDMI Uberguide. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.\u003c\/p\u003e\u003cp\u003eFor use with a BeagleBone Black running Ubuntu\/Debian, we found it works when plugged in, no configuration required.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA power adapter, cables, wire stand, and Raspberry Pi are NOT included.\u003c\/strong\u003e You will need to either purchase a 5-12VDC adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003eTFT Display Datasheet\u003c\/li\u003e\n\u003cli\u003ePower with 5-12VDC\u003c\/li\u003e\n\u003cli\u003eResolution: 1024 x 600\u003c\/li\u003e\n\u003cli\u003eDisplay Weight (excluding power cable): 150g\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"line-height: 20.7999992370605px;\"\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751142089067,"sku":"vmp1787257255224","price":65.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-4-pi-7-display-audio-1024x600-wtouchscreen-discontinued_1.jpg?v=1787257265"},{"product_id":"hdmi-4-pi-7-display-wtouchscreen-1024x600-hdmivgantscpal-discontinued","title":"HDMI 4 Pi: 7\" Display w\/Touchscreen 1024x600- HDMI\/VGA\/NTSC\/PAL [Discontinued]","description":"\u003cp\u003eMake a lovely, touchscreen video setup with a 7\" screen at \u003cb\u003e1024x600 resolution with a resistive touchscreen overlay\u003c\/b\u003e! For this model, we tried to get an inexpensive 1024x600 touchscreen display that was still high quality and would be good for embedded computing usage. The visible display measures 7\" diagonal. We include a driver board with HDMI, VGA and Composite inputs. \u003c\/p\u003e\u003cp\u003eWe also include one of our Resistive Touch Screen to USB Mouse Controllers - AR1100 so you can connect one from your computer (or Pi).  The Resistive Touch Screen to USB Mouse Controller is a board that can handle analog to digital conversion.  Most converters we've found are not very easy to use, and are 'fixed' - making them difficult to calibrate. The AR1100 is a nice chip that solves this problem by acting as a touch-\u0026gt;USB converter and also comes with calibration software. The calibration software is Windows only, but once you've calibrated you can use the screen on any OS. The touch screen shows up as a USB mouse so no special drivers needed. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that. We also noted it does not work with a Raspberry Pi + Windows 10 IOT yet.\u003cbr\u003e\u003cbr\u003eThis version comes in 1024x600 instead of the more expensive 1280x800 display. It's also not IPS so it's not good for wide-angle visibility.\u003cbr\u003e\u003cbr\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.\u003cbr\u003e\u003cbr\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC\/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.\u003cbr\u003e\u003cbr\u003eFor use with a Raspberry Pi we suggest editing \u003cstrong\u003econfig.txt\u003c\/strong\u003e to set the HDMI to the native 1024x600 in case it doesn't detect the resolution properly.  You can see the suggested config.txt in the HDMI uberguide.  The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.\u003c\/p\u003e\u003cp\u003eFor use with a BeagleBone Black running Ubuntu\/Debian, we found it works when plugged in, no configuration required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eA power adapter, cables, wire stand, and Raspberry Pi are NOT included\u003c\/b\u003e. You will need to either purchase a 5-12VDC adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003eTFT Display Datasheet\u003c\/li\u003e\n\u003cli\u003ePower with 5-12 VDC\u003c\/li\u003e\n\u003cli\u003eResolution: 1024 x 600\u003c\/li\u003e\n\u003cli\u003eDisplay Weight (excluding power cable): 150g\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751142154603,"sku":"qgs1787257257500","price":64.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/hdmi-4-pi-7-display-wtouchscreen-1024x600--hdmivgantscpal-discontinued_1.jpg?v=1787257266"},{"product_id":"adafruit-24-tft-lcd-with-touchscreen-breakout-wmicrosd-socket-ili9341","title":"Adafruit 2.4\" TFT LCD with Touchscreen Breakout w\/MicroSD Socket (ILI9341)","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBring colour and control to your project with this 2.4\" 240x320 TFT touchscreen display. It features a bright white LED backlight, built-in controller with RAM buffering, and resistive touch input.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eAdd some jazz \u0026amp; pizzazz to your project with a colour touchscreen LCD. This TFT display is 2.4\" diagonal with a bright (4 white-LED) backlight, and it's colourful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display.\u003c\/p\u003e\n\u003cp\u003eAs a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.\u003c\/p\u003e\n\u003cp\u003eIf you need a larger touchscreen, check out the 2.8\" diagonal or 3.5\" diagonal TFT breakouts. For a smaller display, see our non-touch 2.2\" or 1.8\" or 1.44\" diagonal TFTs\u003c\/p\u003e\n\u003cp\u003eThis display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.\u003c\/p\u003e\n\u003cp\u003eThe display can be used in two modes: 8-bit or SPI. For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d\/c) but is slower than 8-bit mode.\u003c\/p\u003e\n\u003cp\u003eIn addition, 4 pins are required for the touch screen (2 digital, 2 analogue) or you can purchase a resistive touchscreen controller (not included) to use I2C or SPI.\u003c\/p\u003e\n\u003cp\u003eOf course, we wouldn't just leave you with a datasheet and a \"good luck!\". For 8-bit interface fans we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text, and more. For SPI users, we have a library as well, it's separate from the 8-bit library since both versions are heavily optimized. For resistive touch, we also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it. Check out our tutorial for wiring diagrams, schematics, and a walkthrough on this display.\u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/piRURl81t9g?si=iqMtCUhgsQYaxr_e\u0026amp;start=164\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch2 class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cul\u003e\n\u003cli\u003eScreen Dimensions: 43mm x 60mm x 4mm\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 53mm x 60mm x 4mm\u003c\/li\u003e\n\u003cli\u003eWeight: 30.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 21, 2025\u003c\/strong\u003e You may get a blue or black PCB. Functionality remains the same.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of December 5, 2022\u003c\/strong\u003e We've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and datasheets.\u003c\/li\u003e\n\u003cli\u003eOverview\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit 2.4\" TFT LCD with Touchscreen Breakout w\/MicroSD Socket - ILI9341\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53751142187371,"sku":"bte1787257258648","price":18.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/adafruit-24-tft-lcd-with-touchscreen-breakout-wmicrosd-socket-ili9341_1.jpg?v=1787257268"},{"product_id":"29-epaper-display-module-296x128","title":"2.9\" ePaper Display Module (296x128)","description":"\u003cp\u003eA 2.9\" ePaper display module from Waveshare, with a 296x128 resolution, 170° viewing angles and partial refresh support - controlled via SPI.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eePaper displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, ePaper screens are able to hold text and images indefinitely, even without power. ePaper screens are therefore ultra low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. The applications are limitless!\u003c\/p\u003e\n\u003cp\u003eThese ePaper display modules from Waveshare come complete with an embedded controller PCB, communicating via SPI interface, and support partial refresh.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo backlight, keeps displaying last content for a long time even when powered down\u003c\/li\u003e\n\u003cli\u003eUltra low power consumption, basically power is only required for refreshing\u003c\/li\u003e\n\u003cli\u003eSPI interface, for connecting with controller boards like Raspberry Pi\/Arduino\/Nucleo, etc.\u003c\/li\u003e\n\u003cli\u003eComes with development resources and manual (examples for Raspberry Pi\/Arduino\/STM32)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eInterface: 3-wire SPI, 4-wire SPI\u003c\/li\u003e\n\u003cli\u003eOutline dimension: 89.5mm x 38mm\u003c\/li\u003e\n\u003cli\u003eDisplay size: 66.89mm x 29.05mm\u003c\/li\u003e\n\u003cli\u003eDot pitch: 0.138 x 0.138\u003c\/li\u003e\n\u003cli\u003eResolution: 296 x 128\u003c\/li\u003e\n\u003cli\u003eDisplay color: black, white\u003c\/li\u003e\n\u003cli\u003eGrey level: 2\u003c\/li\u003e\n\u003cli\u003eRefresh power: 26.4mW(typ.)\u003c\/li\u003e\n\u003cli\u003eStandby power: \u0026lt;0.17mW\u003c\/li\u003e\n\u003cli\u003eViewing angle: \u0026gt;170°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/E-Ink_display_module_features_1.jpg?v=1695290776\u0026amp;width=700\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable height=\"335\" style=\"border-collapse: collapse; width: 503px; box-sizing: border-box; border-spacing: 0px; max-width: 100%; font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;\" width=\"128\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; width: 114px; text-align: center;\" height=\"20\"\u003e\u003cstrong\u003eSYMBOL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 386px; text-align: center;\"\u003e\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eVCC\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003e3.3V\/5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eGND\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003eGround\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eDIN\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003eSPI MOSI pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eCLK\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003eSPI SCK pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eCS\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003eSPI chip selection, low active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eDC\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003eData\/Command selection (high for data, low for command)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eRST\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003eExternal reset, low active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.0pt; box-sizing: border-box;\" height=\"20\"\u003e\n\u003ctd style=\"height: 15pt; box-sizing: border-box; width: 115px; text-align: center;\" height=\"20\"\u003eBUSY\u003c\/td\u003e\n\u003ctd style=\"box-sizing: border-box; width: 387px; text-align: center;\"\u003eBusy status output, high active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 2.9\" e-Paper Module\u003c\/li\u003e\n\u003cli\u003e1x \u003cspan\u003ePH2.0 20cm 8-Pin\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53751179673963,"sku":"xjy1787257968188","price":13.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/29-epaper-display-module-296x128_1.jpg?v=1787257976"},{"product_id":"154-epaper-display-raw-panel-200x200","title":"1.54\" ePaper Display Raw Panel (200x200)","description":"\u003cp\u003eLooking for an eInk \/ ePaper display for your project? Look no further! These gorgeous little eInk \/ ePaper displays from Waveshare are available in 2.9\", 2.13\" \u0026amp; 1.54\" sizes, so you're bound to find the perfect fit for your needs!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eePaper \/ eInk displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, eInk screens are able to hold text and images indefinitely, even without power.\u003c\/p\u003e\n\u003cp\u003eePaper screens are therefore ultra-low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. The applications are limitless!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cstrong\u003eThis comes with the screen only! This does NOT come with a\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003econtroller PCB.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo backlight, keeps displaying last content for a long time even when powered down\u003c\/li\u003e\n\u003cli\u003eUltra-low power consumption, basically power is only required for refreshing\u003c\/li\u003e\n\u003cli\u003eSPI interface, for connecting with controller boards like Raspberry Pi\/Arduino\/Nucleo, etc.\u003c\/li\u003e\n\u003cli\u003eComes with development resources and manual (examples for Raspberry Pi\/Arduino\/STM32)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eInterface: 3-wire SPI, 4-wire SPI\u003c\/li\u003e\n\u003cli\u003eOutline dimension: 48mm x 33mm\u003c\/li\u003e\n\u003cli\u003eDisplay size: 27.6mm x 27.6mm\u003c\/li\u003e\n\u003cli\u003eDot pitch: 0.138 x 0.138\u003c\/li\u003e\n\u003cli\u003eResolution: 200 x 200\u003c\/li\u003e\n\u003cli\u003eDisplay colour: black, white\u003c\/li\u003e\n\u003cli\u003eGrey level: 2\u003c\/li\u003e\n\u003cli\u003eRefresh power: 26.4mW(typ.)\u003c\/li\u003e\n\u003cli\u003eStandby power: \u0026lt;0.17mW\u003c\/li\u003e\n\u003cli\u003eViewing angle: \u0026gt;170°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003cspan data-mce-fragment=\"1\"\u003e1.54\" e-Paper\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53751179739499,"sku":"ksu1787257969096","price":4.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/154-epaper-display-raw-panel-200x200_1.jpg?v=1787257978"},{"product_id":"213-epaper-display-raw-panel-250x122","title":"2.13\" ePaper Display Raw Panel (250x122)","description":"\u003cp\u003eLooking for an eInk \/ ePaper display for your Raspberry Pi or Raspberry Pi Zero? Look no further! These gorgeous little eInk \/ ePaper displays from Waveshare are available in 2.9\", 2.13\" \u0026amp; 1.54\" sizes, so you're bound to find the perfect fit for your project!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eePaper \/ eInk displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, eInk screens are able to hold text and images indefinitely, even without power. ePaper screens are therefore ultra low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. The applications are limitless!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003eThis is for the screen only! This does not come with a\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003econtroller PCB.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo backlight, keeps displaying last content for a long time even when power down\u003c\/li\u003e\n\u003cli\u003eUltra-low power consumption, basically power is only required for refreshing\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 2B\/3B\/Zero\/Zero W\u003c\/li\u003e\n\u003cli\u003ePreserved solder pads for SPI interface, for connecting with other controller boards like Arduino\/Nucleo, etc.\u003c\/li\u003e\n\u003cli\u003eComes with development resources and manual (examples for Raspberry Pi\/Arduino\/STM32)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eInterface: SPI\u003c\/li\u003e\n\u003cli\u003eOutline dimension: 65mm x 30.2mm\u003c\/li\u003e\n\u003cli\u003eDisplay size: 23.71mm x 48.55mm\u003c\/li\u003e\n\u003cli\u003eDot pitch: 0.194 x 0.194\u003c\/li\u003e\n\u003cli\u003eResolution: 250 x 122\u003c\/li\u003e\n\u003cli\u003eDisplay color: black, white\u003c\/li\u003e\n\u003cli\u003eGrey level: 2\u003c\/li\u003e\n\u003cli\u003eRefresh power: 26.4mW (typ.)\u003c\/li\u003e\n\u003cli\u003eStandby power: \u0026lt;0.17mW\u003c\/li\u003e\n\u003cli\u003eViewing angle: \u0026gt;170°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct\u003cstrong\u003e \u003c\/strong\u003eWiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 2.13\" E-Paper Display\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53751179772267,"sku":"blj1787257970167","price":4.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/213-epaper-display-raw-panel-250x122_1.jpg?v=1787257978"},{"product_id":"29-epaper-display-raw-panel-296x128","title":"2.9\" ePaper Display Raw Panel (296x128)","description":"\u003cp\u003eLooking for an eInk \/ ePaper display for your Raspberry Pi or Raspberry Pi Zero? Look no further! These gorgeous little eInk \/ ePaper displays from Waveshare are available in 2.9\", 2.13\" \u0026amp; 1.54\" sizes, so you're bound to find the perfect fit for your project!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eePaper \/ eInk displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, eInk screens are able to hold text and images indefinitely, even without power. ePaper screens are therefore ultra low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. The applications are limitless!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003cstrong data-mce-fragment=\"1\"\u003eThis is for the screen only! This does NOT come with a\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003econtroller PCB.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo backlight, keeps displaying last content for a long time even when power down\u003c\/li\u003e\n\u003cli\u003eUltra-low power consumption, basically power is only required for refreshing\u003c\/li\u003e\n\u003cli\u003eComes with development resources and manual (driver board schematic, examples for Raspberry Pi\/Arduino\/STM32)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eInterface: 3-wire SPI, 4-wire SPI\u003c\/li\u003e\n\u003cli\u003eOutline dimension: 36.7mm x 79.0mm x 1.05mm\u003c\/li\u003e\n\u003cli\u003eDisplay size: 66.89mm x 29.05mm\u003c\/li\u003e\n\u003cli\u003eDot pitch: 0.138 x 0.138\u003c\/li\u003e\n\u003cli\u003eResolution: 296 x 128\u003c\/li\u003e\n\u003cli\u003eDisplay color: black, white\u003c\/li\u003e\n\u003cli\u003eGrey level: 2\u003c\/li\u003e\n\u003cli\u003eRefresh power: 26.4mW(typ.)\u003c\/li\u003e\n\u003cli\u003eStandby power: \u0026lt;0.17mW\u003c\/li\u003e\n\u003cli\u003eViewing angle: \u0026gt;170°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 2.9\" e-Paper Display\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53751179837803,"sku":"vfk1787257971346","price":8.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/29-epaper-display-raw-panel-296x128_1.jpg?v=1787257980"},{"product_id":"154-epaper-display-module-200x200","title":"1.54\" ePaper Display Module (200x200)","description":"\u003cp\u003eA 1.54\" ePaper display module from Waveshare, with a 200x200 resolution, 170° viewing angles and partial refresh support - controlled via SPI.\u003c\/p\u003e\n\u003cp\u003eePaper displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, ePaper screens are able to hold text and images indefinitely, even without power. ePaper screens are therefore ultra low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. The applications are limitless!\u003c\/p\u003e\n\u003cp\u003eThese ePaper display modules from Waveshare come complete with an embedded controller PCB, communicating via SPI interface, and support partial refresh.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis module includes a 1.54\" (200x200)\u003c\/strong\u003e\u003cstrong\u003e eInk display \u0026amp; cable assembly designed to plug into your microcontroller's SPI interface.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo backlight, keeps displaying last content for a long time even when power down\u003c\/li\u003e\n\u003cli\u003eUltra low power consumption, basically power is only required for refreshing\u003c\/li\u003e\n\u003cli\u003eSPI interface, for connecting with controller boards like Raspberry Pi\/Arduino\/Nucleo, etc.\u003c\/li\u003e\n\u003cli\u003eComes with development resources and manual (examples for Raspberry Pi\/Arduino\/STM32)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eInterface: 3-wire SPI, 4-wire SPI\u003c\/li\u003e\n\u003cli\u003eOutline dimension: 48mm x 33mm\u003c\/li\u003e\n\u003cli\u003eDisplay size: 27.6mm x 27.6mm\u003c\/li\u003e\n\u003cli\u003eDot pitch: 0.138 x 0.138\u003c\/li\u003e\n\u003cli\u003eResolution: 200 x 200\u003c\/li\u003e\n\u003cli\u003eDisplay color: black, white\u003c\/li\u003e\n\u003cli\u003eGrey level: 2\u003c\/li\u003e\n\u003cli\u003eRefresh power: 26.4mW(typ.)\u003c\/li\u003e\n\u003cli\u003eStandby power: \u0026lt;0.17mW\u003c\/li\u003e\n\u003cli\u003eViewing angle: \u0026gt;170°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct\u003cstrong\u003e \u003c\/strong\u003eWiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 1.54\" e-Paper Module\u003c\/li\u003e\n\u003cli\u003e1x \u003cspan\u003ePH2.0 20cm 8-Pin\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53751179903339,"sku":"kua1787257972204","price":6.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1268\/3883\/files\/154-epaper-display-module-200x200_1.jpg?v=1787257981"}],"url":"https:\/\/pickvirello.com\/collections\/lcds-displays.oembed","provider":"Pickvirello","version":"1.0","type":"link"}